Installing The Rear Wheel - KTM F5360R1 Owner's Manual

15 WHEELS, TIRES
15.4
164

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
V00609-10
Main work
–
Check the rear hub rubber dampers.
–
1
Remove spacers .
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease ( p. 255)
–
Insert the spacers.
( p. 166)
2 A
and contact surfaces