1
Installing the Sampler
Table 13
Location
F
G
H
l
J
The distances need to be measured with high precision. It is recommended to use calipers.
NO TE
40
Well Plate Dimensions (continued)
Description
Definition
Row offset
Distance (in mm) from the back
edge (bottom) to the center of the
first hole (A1)
Column offset
Distance (in mm) from the left edge
(bottom) to the center of the first
hole (A1)
Column shift
Offset (in mm) to Y when the rows
are not straight but staggered
Well diameter
Diameter (in mm) of the well
WeIl depth
Distance (in mm) from the top of the
plate to the bottom of the well
Limits
at least 4 mm
up to 45 mm
1100 Series WS MWS Reference Manual