M.T.H. Proto-Sound 3.0 Installation Manual page 30

STEP 3:
Select the Proto-Sound 3.0 file from the results list. Right click and save the
Proto-Sound 3.0 Consumer Package file in .zip format to your computer. Save it
in the My MTH Files folder, located in C/Programs/MTH DCS Loader/My MTH
Files, so the files will be found easily.
Unzip the file one time to the
same location to expose the Sound
file (...F4x.MTH) and the Chain
File (chain or code.zip). Use the
appropriate icon on the loader to
install the sound file and the
FLASH icon on the loader to load
the chain file into the engine.
Use the DCS Loader Program to
load the sound file into your
engine.
STEP 4:
Name the engine so the name appears
on the DCS remote using the Edit
Name DCS feature under Engine
Setup. Add the engine to the DCS
system. The engine will add, but no
name will appear next to the engine
address number. Use the edit name
feature to add the engine name (limit
16 characters).
Proto-Sound 3.0 Upgrade Kit Installation Guide - Diesel/Electric
Click and save the .zip file to your computer
After adding the engine into the DCS
system, name the engine on your DCS
remote using the Edit Name feature
30