Mounting The Tach Reader To The Tach Bracket - M.T.H. Proto-Sound 3.0 Installation Manual

Mounting Tach Reader To Tach Reader Bracket
- Insert the tach reader into the tach
reader bracket.
- The gap between the optical sensor
and flywheel should be 0.5mm
(0.022")-1.5mm (0.060"); 0.75mm
(.030") is optimum.
- If the gap is too large, decrease the
tach reader space between reader
and flywheel as detailed below.
- Spark plug feeler gauges are useful
to establish the proper gap.
Proto-Sound 3.0 Upgrade Kit Installation Guide - Diesel/Electric
When inserted into the tach reader
bracket, the distance between the tach
reader and the flywheel should be between
the tach reader and the flywheel should be
between .5mm & 1.5mm.
Check the distance between the flywheel
and tach reader. If there is no gap, you
need to use the bracket for a 30 mm
flywheel.
22