Inspection & Review - M.T.H. Proto-Sound 3.0 Installation Manual

Inspection & Review
Before beginning the installation, Inspect the engine to be upgraded and verify
the following are in good working order:
- Pick-up rollers
- Motor w/flywheels
- Smoke unit (if equipped)
- Speaker mounting hardware
- Volume pot
- Coupler mounting hardware, "T" bar, spring, c-clip
- Constant voltage lighting board and connected bulbs.
Note: If any of the above items are
missing or not in working order, procure
the required parts before continuing.
Note: It might be helpful to label the
Front and rear of the chassis as a
reminder which direction the engine
should first move when powered up.
Make sure pickup rollers are clean and roll freely.
Proto-Sound 3.0 Upgrade Kit Installation Guide - Diesel/Electric
Note: Before beginning
installation, see discussion on
page 26 on "wire management"
which should be planned as you
proceed during the installation.
Part of the plastic wire tube (Q)
may be used for this purpose.
8