Contents Of The Kit - M.T.H. Proto-Sound 3.0 Installation Manual

Contents Of The Kit

A) Proto-Sound 3.0 Board and Plastic Bracket
AA) Proto-Sound 3.0 Heat Sink Bracket Kit
B) Mars/Ditch (LED) Light (4)
C) Proto-Coupler (2)
CC) Coupler Insulator (2)
D) Backup Light (LED)
E) Marker Lights (LED) - Red
EE) Marker Lights (LED) - Green
F) 40-Pin Chassis Harness w/Tach Reader,
Vol. Pots, DCS/DCC Switch
FF) Tach Reader Bracket
FFF) Tach Tape
G) Headlight
H) Speaker
(A) Proto-Sound 3.0 Circuit Board
AI-1000034
(AA) Protosound 3/2 Heat Sink Bracket Kit
IC-0000026
(includes heat sink bracket, board mounting
bracket and 2 screws)
(B) Mars/Ditch (LED) Light (4)
CE-2000002
Proto-Sound 3.0 Upgrade Kit Installation Guide - Diesel/Electric
I) Recharging Port Hardware Spacers (2)
J) Interior Lights (LED)
K) Overhead Blinking Light
L) 6/32 x 6mm Screws (3)
M) 6/32 Nuts (3)
N) Shrink Tubing
O) Wire Management Coil
P) Wire Ties (6) 4"
Q) Wire Nuts (2)
R) Speaker Plug
S) 8-Pin Chassis Harness
Proto-Sound 3.0 Plastic
Mounting Bracket
IH-0000391
(C) Proto-Coupler (2)
DD-0000032
(without wires)
CC) Coupler Insulator (2)
ID-0000123
3