Nomadix AG 2400 Quick Start Manual page 5

Step 1c: PPPoE Dynamic IP Client Configuration
Enter p[ppoe] when prompted. Enter the following mandatory settings for a PPPoE connection
with dynamic PPP IP configuration shown in Figure 6.
Configuring minimal WAN interface connectivity parameters:
Port Role
w
anIf) :
Configuration Mode
PPPoE Service Name
Service
LCP Echo-Request Interval
Maximum LCP Non-responses
PPP Authentication User Name
User Name
PPP Authentication Password
Password
PPP IP Configuation Mode
PPP Static IP Address
PPP Maximum TCP MSS
WAN 802.1Q tagging
VLAN ID
DNS Domain Name
DNS Server 3
Figure 6: Selecting PPPoE with dynamic IP configuration.
A WAN port summary page will then be displayed as shown in
Port Name
Port Role
Configuration Mode
IP Address
Subnet Mask
Gateway IP
PPPoE Service Name
LCP Echo-Request Interval
Maximum LCP Non-responses
PPP Authentication User Name
PPP Authentication Password
PPP IP Configuation Mode
PPP Static IP Address
PPP Maximum TCP MSS
WAN 802.1Q tagging
VLAN ID
DNS Domain Name
DNS Server 1
DNS Server 2
DNS Server 3
Additional NAT IP addresses
show all
show interface <name>
modify interface <name> - Modify a single WAN Interface configuration
Type b to go back, <esc> to abort, ? for help.
Ethernet port/WAN interface configuration>
Figure 7: WAN port PPPoE client configuration summary page.
[wanIf ] (outOfService, subscriberIf,
[static ] (static, dhcp, pppoe) : p
[ ] : ("none" to clear) : Your
[30 ] :
[6 ] :
[ ] : ("none" to clear) : Your
[ ] : ("none" to clear) : Your
[dynamic ] (dynamic, static) :
[0.0.0.0 ] :
[1452 ] :
[Disabled ] :
[1 ] :
[nomadix.com ] :
[0.0.0.0 ] :
: WAN
: wanIf
: pppoe
: Your IP address
: Your subnet mask
: Your gateway
: Your Service Name
: 30
: 6
: Your user name
: Your password
: dynamic
: 0.0.0.0
: 1452
: Disabled
: 1
: Your domain name
: Your dns server IP address
: 0.0.0.0
: 0.0.0.0
: Disabled
- Show all WAN Interface configuration
- Show a single WAN Interface configuration
5
Figure 7.
02.11.2016