Nomadix AG 2400 Quick Start Manual page 4

Step 1b: DHCP Client Configuration
Type d[hcp] for the configuration mode as shown in Figure 4.
Configuring minimal WAN interface connectivity parameters:
Configuration Mode
WAN 802.1Q tagging
VLAN ID
DNS Server 3
Figure 4: Selecting DHCP Client for WAN configuration.
A WAN port summary page will then be displayed as shown in Figure 5.
Port Name
Port Role
Configuration Mode
IP Address
Subnet Mask
Gateway IP
WAN 802.1Q tagging
VLAN ID
DNS Domain Name
DNS Server 1
DNS Server 2
DNS Server 3
Additional NAT IP addresses
show all
show interface <name>
modify interface <name> - Modify a single WAN Interface configuration
Type b to go back, <esc> to abort, ? for help.
Ethernet port/WAN interface configuration>
Figure 5: WAN port DHCP client configuration summary page.
If everything is correct in the summary, type b[ack] to return to the previous menu, and proceed
to step 2 to enter location information.
Otherwise, select an option from the Ethernet port configuration menu to display or make
changes to the WAN port settings. When finished with settings, type b[ack] to return to the
previous menu, and go to step 2.
[static ] (static, dhcp, pppoe) : d
[Disabled ] :
[1 ] :
[0.0.0.0 ] :
: WAN
: wanIf
: dhcp
: Your IP address
: Your subnet mask
: Your gateway IP addrss
: Disabled
: 1
: Your domain name
: Your primary DNS IP address
:
: 0.0.0.0
: Disabled
- Show all WAN Interface configuration
- Show a single WAN Interface configuration
4 02.11.2016