General Specifications; Specifications - Pro-face PFXGP4502WADW Hardware Manual

Specifications

Section 3.1

General Specifications

General Specifications
Specifications
Specification
Rated input voltage
Input voltage limits
Acceptable voltage drop
Power consumption
In-rush current
Voltage endurance between power
terminal and functional ground (FG)
Insulation resistance between power
terminal and FG.
Ambient operating temperature
(cabinet interior and panel face)
Storage temperature
Relative humidity
Air purity (dust)
Pollution degree
Corrosive gases
Atmospheric pressure
Vibration immunity
Shock immunity
Cooling method
Protection (front panel)
Protection (rear panel)
1
For in-rush current, the FWHM (full-width, half maximum) value is approximately 50 s (when exceeding
25 A).
22
Value
24 Vdc
20.4...28.8 Vdc
 1 ms with lowest input voltage
 10 ms with rated input voltage
GP-4402WW: 9.2 W
GP-4502WW: 10 W
1
 50 A
1000 Vac 5 mA for 1 min
10 M or higher at 500 Vdc
0...50 C (32...122 F)
-20...60 C (-4...140 F)
90 % non-condensing
3 -6 3
 0.1 mg/m
(3.5 oz/ft
2
Free of corrosive gases
800...1,114 hPa (2,000 m (6,561 ft) or less)
IEC 61131-2 ed.3 (07)
5...150 Hz, 3.5 mm (0.38 in) max., 1 g on 3 axes.
IEC 61131-2 ed.3 (07)
1/2 sinusoidal pulse for 11 ms, 15 g on 3 axes
Natural air circulation
IP 65 - (IEC 60529)
Enclosure type 4 indoor use only (UL 50) with screw installation
fasteners
IP 20 - (IEC 60529)
) (non-conductive levels)