Network Settings; Lan Status Lights; Configuring Network Settings - Polycom CX7000 series Administrator's Manual

Network Settings

LAN Status Lights

Configuring Network Settings

Polycom, Inc.
The LAN connector on the Polycom CX7000 has two lights to indicate
connection status and traffic:
Indicator Light
Left light off
Left light green
Left light orange
Right light yellow
Changing this setting causes the system to restart. Do not power the system off
until the restart is complete.
To configure Network Settings:
Click Options >
1
Click Advanced Settings.
2
Sign in using the administrator account appropriate to your sign-in
3
mode:
— Domain Member: local administrator or domain administrator
— Standalone: local administrator
Click Network.
4
Configure these settings:
5
Setting
Obtain an IP address
automatically
Use the following IP
address
IP Address
Administrator's Guide for Polycom CX7000 Systems
Connection Status
No connection.
10M connection.
100/1000M connection.
Ethernet link established. The light goes off each time a
frame is transmitted or received.
Configuration.
Description
Specifies that the system gets an IP address
automatically.
Specifies that the IP address is not assigned
automatically.
Specifies the IP address to use for this system.
15