Ethernet Software Configuration - Aaeon SBC-556/L Manual

Ethernet software configuration

The onboard Ethernet interface supports all major network
operating systems. I/O addresses and interrupts are easily
configured via the Award Setup. To configure the medium
type, to view the current configuration, or to run diagnostics,
please refer to the following istructions:
1. Power the mainboard on. Ensure that the RSET8139.EXE
file is located in the working drive.
2. Choose RSET8139.EXE from:
cd-rom : \CD ROM\mode name\ driver\ethernet\
The Ethernet configuration program will then be displayed.
"cd-rom" : the drive letter of your CD-ROM drive
"model name" : the model number of your product
3. This simple screen shows all the available options for the
Ethernet interface. Just highlight the option you wish to
change by using the Up and DOWN keys. To change a
selected item, press <ENTER>, and a screen will appear with
the available options. Highlight your option and press
<ENTER>. Each highlighted option has a helpful message
guide displayed at the bottom of the screen for additional
information.
4. After you have made your selections and the configuration
is what you want, press <ESC>. A prompt will appear
asking if you want to save the configuration. Press "Y" if
you want to save.
The Ethernet Setup Menu also offers three very useful diagnos-
tic functions. These are:
1. Run EEPROM test
2. Run Diagnostics on Board
3. Run Diagnostics on Network
Each option has its own display screen which shows the format
and result of any diagnostic tests undertaken.
94 SBC-556/L User Manual
Oem8139.exe and press <ENTER>.