Japan Radio Co. WIPAS2 Instruction Manual page 86

・ For the stretching margin of self-bonding tape, see the instruction manual for the
product.
・ When wrapping self-bonding tape, start at the base of the small window and end at
the end of the waterproof sleeve. Next, reverse the direction and end at the base of
the small window. This procedure makes an attractive wrapping and improves the
waterproof effect by making any air pocketsless likely.
・ Overlapping the wraps also protects against air pockets.
・ Press evenly along the entire length of tape to remove air pockets.
・ Make sure that there are no air pockets between the self-bonding tape and the small
window of the WT or the waterproofing parts. Air pockets will degrade the
waterproofing effect.
Step5 Wrap the PVC tape around the Small lid to protect it from ultraviolet rays.
Wrap the PVC tape so that the cold-shrinkable tube is completely hidden. Wrap the tape from
the small Lid of the WT to the Ethernet cable, overlapping half of the previous layer (1). Next,
reverse the wrapping direction and wrap one more time to the starting point (2).
・ Please never get the small lid inside wet with water. It causes the trouble.
・ Please fix the each part of the waterproofing parts to small lid without a missing part.
It cause of poor waterproofing.
(1)
Figure 5-51
5-68
(2)