Service manual
Repair and maintenance
Head
Replacing the lamp
A hot discharge lamp is under
pressure and can explode without
warning. Allow the fixture to cool
for at least 60 minutes and protect
yourself with safety glasses and
gloves before handling a lamp.
1.
Remove the four screws (1) and remove the heat
shield (2).
2.
Remove the four screws (3).
3.
Gently remove the lamp (4).
NOTE! Always wear gloves when handling the
lamp.
MAC Axiom Hybrid - Revision B, 05-08-2017
2
1
Figure 52: Removing the heat shield
3
Figure 53: Removing the screws
4
Figure 54: Removing the lamp
1
3
33 of 59