Standard; Exit; Connection; Qs Server - Arcom QAM Snare Snoop User Manual

Standard

This allow to change the television standard between
NTSC, PAL B/G, and PAL D/K so the proper channel listing
can be selected. It is a one-time setup parameter.

Exit

Exit returns to the higher-level menu screen. Select and
press enter.

Connection

The connection menu item is used to select the QAM
Snare server and Wi-Fi devices the Snoop connects to.
Specifics related to these connections must be entered using
the Q-browser software program by connecting a PC to the
device through the USB port on the cradle. Multiple profiles
may be entered, and the connection setting allows the user to select from previously
entered profiles, but it will not allow profiles to be entered directly into the Snoop.

QS Server

The QAM Snare Server which the
device needs to connect to is
selected here. Press enter and the
profiles of servers previously
configured through the Q-browser
are displayed, with the server name
and IP address displayed. To select a different server press next server. If the required
server is not displayed it must be configured through the Q-browser. Multiple server
9