Table of Contents
Advertisement
General
The General settings button provides for access to several
miscellaneous configuration items which are detailed below.
Information
The Information selection item provide the user with
information on the Device ID (which by default is the MAC
address) and Technician ID that was assigned to the unit
through Q-browser. It provides information on the Firmware
revision, the QAM Snare Server name it is configured to
connect to, and the device MAC address. For security
reasons, the Wi-Fi configuration is not displayed – but this
information is available through the Q-browser.
Sound
The Sound button allows the user to turn the audio alarm
and button feedback on or off. Naviagate to Sound and
press enter, then use the right or left arrow to select on or
off, then press enter to confirm the selection. The threshold
setting for high and low leak alarms is configured in the Leak
alarms menu item, and the sound off setting configured here
will override the Leak alarm setting.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the QAM Snare Snoop and is the answer not in the manual?