Mounting; Mounting Of Sensor - Panasonic EX-Z Series User Manual

3.

Mounting

3-1 Mounting of sensor

● The tightening torque should be 0.2N·m or less.
● M2 screw and nut, spring washer, and flat washer are accessory of this product.
When tapping in mounting section (Unit: mm)
<Side sensing type>
Sensing
8.5
direction
M2 screw (length 10)
(accessory)
When using screws and nuts that are accessory of the product (Unit: mm)
<Side sensing type>
Sensing
8.5
direction
M2 screw (length 10)
(accessory)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
M2×0.4
Tapping depth: 7
M2×0.4
Tapping depth: 5
Nut
Spring washer
Flat washer
Thickness of mounting Thickness of mounting
plate: 2 or less plate: 2 or less
<Front sensing type>
M2 screw (length 6)
(accessory)
<Front sensing type>
Nut
Spring washer
Flat washer
Sensing
8.5
direction
Sensing
8.5
direction
M2 screw (length 6)
(accessory)
5