Drive Inhibit Indication; Cut-Off Voltage - Invacare LiNX DLX-REM110 User Manual

Invacare® LiNX

4.3 Drive inhibit indication

Drive inhibit mode is indicated by the battery gauge with a
right-to-left chase sequence.
The chase sequence continues until the error condition has been
cleared.

4.4 Cut-off voltage

When the battery voltage decreases below the battery cut-off voltage:
28
•
the status indicator flashes red (Flash code 2, refer to 4.1.1
Error codes and diagnosis codes, page 26),
•
the red LED on the battery gauge flashes,
•
the horn sounds once every ten seconds.
1602969-B