Using the Features
To scan rapidly through the
channels, press and hold down
CH+ or CH–.
If power is in STANDBY,
press 0-9 or CH+/– to turn on.
Turn on and off the projection TV and other audio/video
equipment you have programmed into the remote control.
For instructions, see "Programming the Remote Control"
on page 58.
Select the equipment (TV, CABLE) that you want to
operate. The indicator lights up momentarily when pushed
to show which device the remote control is operating.
Cycles through the video equipment connected to your
projection TV's video inputs: TV, VIDEO 1, VIDEO 2,
VIDEO 3, VIDEO 4, VIDEO 5 and VIDEO 6.
qh 0 – 9 and
Press 0 - 9 to select a channel, the channel changes after 2
seconds. Press ENTER to select immediately.
Turns on/off Twin View. For details, see "Using Twin
View™" on page 38.
Press to display the projection TV on-screen menu. Press
again to exit from the menu.
ql CH +/–
Scan through channels.
Press repeatedly to step through the available high-
resolution picture modes: Interlaced, Progressive and
CineMotion. For details, see "Using the Video Menu" on
wa WIDE MODE
Press to step through the wide screen modes: Wide Zoom,
Normal, Full and Zoom. For details, see "Using Wide
Screen Mode" on page 44.