Connecting a Digital TV Receiver
Be sure to read the
Set-top box manual.
Digital TV Set-top box
Disconnect all power sources before making any connections.
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P
The Y, P
be connected to provide sound.
Component video connection is necessary to view 480p, 720p and
1080i formats. You may also use the S VIDEO or Composite Video
connections, however, composite video (Y, P
best picture quality for all format types.
Using an audio cable, connect the Digital TV Set-top box's Audio OUT
jacks to the projection TV's AUDIO IN jacks.
VMC-10HG (not supplied)
RK-74A (not supplied)
You cannot record the signal from any equipment connected into the
This projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
Installing and Connecting the Projection TV
jacks to the projection TV.
jacks do not provide audio, so audio cables must
) will provide the