Using The Features; Using The Remote Control - Sony KP-HR432K90 Service Manual

Using the Features

Using the Remote Control

Button Descriptions
The following table describes the buttons on the remote control that are for
more advanced functions.
Main Power button must be turned ON to activate the remote control.
Outside Panel
Button Description
1 MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
2 SLEEP Press repeatedly until the projection TV displays the time
in minutes (15, 30, 45, 60, or 90) that you want the
projection TV to remain on before shutting off
automatically. Cancel by pressing until SLEEP OFF
appears. While the Sleep feature is set, press once to view
the remaining time.
3 ANT Changes between the VHF/UHF input and the AUX input.
4 DISPLAY
Press once to display the current time and channel label (if
set) and channel number. Press again to turn Display off.
See page 54 for details on setting the time.
5 JUMP
Press to jump back and forth between two channels. The
projection TV alternates between the current channel and
the last channel that was selected.
6 FREEZE
Freezes the window picture. Press again to restore the
picture.
7 INDEX
Press to enter the Channel Index mode. You can view and
select from twelve channels without leaving the current
one.
8
The joystick allows for movement of the on-screen cursor.
Pressing down on the center of the joystick selects the item.
9 VOL +/–
Adjusts the volume.
q; PIC MODE
Press repeatedly to step through the available video picture
modes: Vivid, Standard, Movie and Pro. Also available in
the Video menu. For details, see "Selecting Video Options"
on page 47.
qa FAVORITES
Displays the Favorite Channels list. For details, see "Using
Favorite Channels" on page 39.
qs RESET Press when in a menu to reset the settings to the factory
defaults.
(Continued)
33