Sony KP-HR432K90 Service Manual page 29

3. Operation Method for Fine Adjustment
1) Select the PJE mode.
2) Select FDIS so that the data at each position can be displayed
in the fine adjustment mode, and set the data to "01".
3) Press "9" button on the commander, and the fine adjust-
ment mode will be active where a green marker appears in
the center of screen (in the case of GRN mode).
4) Press joystick, and the marker color will be switched be-
tween green (GRN mode) and white alternately.
5) Use "1" or "4" button on the commander, or the joystick
to move the marker to the position to be adjusted, where fine
adjustment can be made.
• When marker color is white.
(in this case, fine adjustment is disabled)
Operating the joystick can move the marker
up, down, or to the left or right freely.
• When marker color is green. (GRN mode)
1 : moves the marker clockwise from center to outside.
4 : moves the marker counterclockwise from outside to center.
• Fine adjustment can be made on the basis of marker
position using v, V, b, B directiom of the joystick.
Move joystick v direction
CROSSHATCH
6) Press "9" button on the commander to return to the coarse
adjustment mode.
KP-HR432K90/HR532K90/HR532N90/HW572K90
Move joystick B direction
CROSSHATCH
RM-Y909K RM-Y909K
3-11-4. PJE Adjustment
(Sub Deflection Adjustment)
Adjustment
Adjustment Item
CENT
SKEW
SIZE
LIN
KEY
PIN
MLIN
MSIZ
Note: If the value of over the limit value, adjust these in the fine
adjustment .
Coarse Data Limit Valune.
Cent H 35±170 V 20±170, Size H-75max, Lin H Blu
-425min, H Red 425max.
<Adjustment for NTSC Full Mode>
• The adjustment should be done in the numerical order
given.
1. Green Adjustment
1) Place the caps on the red and blue lenses so that only the
green color is displayed.
2) Enter the monoscope signal to set.
3) Select the PJE mode.
4) Press "6" button on the commander to display internal test
signal (crosshatch).
5) Select "GRN CENT", and adjust so that the picture coincide
in the center of screen.
• GRN CENT (horizontally/vertically)
Push the joystick
to B
Push the joystick
to v
– 29 –
RM-Y908
a : Yes – : No
Adjustment Type
GRN RED BLU
H / V H / V H / V
a / a a / a a / a
a / a a / a a / a
a / a a / a a / a
a / a a / a a / a
– / a – / a – / a
a / a a / a a / a
a / – a / – a / –
a / – a / – a / –
Push the joystick
to b
Push the joystick
to V
RM-Y909K