Installing and Connecting the Projection TV
Connecting a Satellite Receiver
Rear of projection TV
Disconnect all power sources before making any connections.
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
Using AUDIO and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the projection TV's AUDIO and
S VIDEO IN jacks.
Connect a coaxial cable from your cable or antenna to the projection
TV's VHF/UHF jack.
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)