Analogue Input 2 (Control Keypad: Menu M2 G2.2.3); Free Analogue Input, Signal Selection (Keypad: Menu M2 G2.2.4) - Vacon NXP User Manual

16 • vacon
6.3.3 Analogue input 2 (Control keypad: Menu M2
Code Parameter
P2.2.3.1 AI2 signal selection
P2.2.3.2 AI2 filter time
P2.2.3.3 AI2 signal range
AI2 custom
P2.2.3.4
minimum setting
AI2 custom
P2.2.3.5
maximum setting
AI2 reference
P2.2.3.6 scaling, minimum
value
AI2 reference
P2.2.3.7 scaling, maximum
value
AI2 joystick
P2.2.3.8
hysteresis
P2.2.3.9 AI2 joystick offset
Table 6. Analogue input 2 parameters, G2.2.3
6.3.4 Free analogue input, signal selection (Keypad: Menu M2
Code Parameter
Scaling of current
P2.2.4.1
P2.2.4.2 Torque limit
Table 7. Free analogue input signal selection, G2.2.6
6
shaft synchronization application – parameter lists
Min Max
0
0,00 10,00
0
-100,00 100,00
-100,00 100,00
0,00 320,00
0,00 320,00
0,00 20,00
-50,00 50,00
Min Max
0
limit
0
G2.2.3)
Unit Default
A.2
s 0,10
3 1
% 0,00
% 100,00
Hz 0,00
Hz 0,00
% 0,00
% 0,00
Unit Default
3 0
3 0
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
Cust ID Note
388
329 0=No filtering
0=0...100%*
1=20...100%*
325
2= -10V...+10V*
3= Custom range*
326
327
Selects the frequency that
393 corresponds to the min.
reference signal
Selects the frequency that
394 corresponds to the max.
reference signal
395
166
G2.2.4)
Cust ID Note
0=Not used
1=AI1
399
2=AI2
3=Fieldbus
485 See par. 2.2.4.1