Pico has been advised of the possibility of such damages arising from any defect or error in this manual or product.
Page 3
Symbols These safety and electrical symbols may appear on the product or in this guide: Symbol Description Direct current Terminal can be used to make a measurement ground connection. Earth (ground) terminal The terminal is NOT a safety or protective earth. Possibility of electric shock Appearance on the product Caution...
Page 4
Voltage v frequency rating curve 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz WARNING This probe does not carry a measurement category rating. To prevent electric shock, do not connect to a mains (line) voltage or a derived voltage that can carry the overvoltage transients that may be present.
Page 5
The probe contains no user-serviceable parts. Repair, servicing and calibration require specialized test equipment and must only be performed by Pico or an approved service provider. There may be a charge for these services unless covered by the Pico two-year warranty.
Retractable hook tip Ground lead Adjustment tool Tip insulating sleeve Cable marker Optional accessories Order code Description TA384 Replacement rigid probe tips for TA375 and TA386, pack of 5 TA385 Replacement spring probe tips for TA375 and TA386, pack of 5...
Page 7
Locating sleeve. Ensures reliable and stable contact with conductor under test. Marker sleeves. Attach to the probe cable to identify a channel. * WARNING. To avoid injury and equipment damage, use for ground connections only. WARNING. All accessories are safety-tested. Replace only with Pico accessories.
Compensation range 10 to 35 pF 10 to 35 pF Total length 1.2 m nominal Weight About 55 g * equal to input resistance of oscilloscope ** scope capacitance DO310-1 Copyright (C) 2018 Pico Technology Ltd. www.picotech.com All rights reserved.