Basic Operations - Kenwood TK-7360 Instruction Manual

S P
WITCHING OWER
Press to swtch the transcever ON.
• A beep sounds and the dsplay llumnates. If the Power-on tone select s set to OFF,
the beep wll not sound.
• If the Transcever Password functon s programmed, "PASSWORD" wll appear on the
dsplay. Refer to "Transcever Password", on page 6.
Press agan to swtch the transcever OFF.
n Transceiver Password
To enter the password:
1 Press /
• When usng a keypad, smply enter the password dgts and proceed to step 4.
2 Press C> to accept the entered dgt and move to the next dgt.
• Press A or # to delete an ncorrect dgt. Press and hold A or # to delete all
dgts.
3 Repeat steps 1 and 2 to enter the entre password.
4 Press S or
• If you enter an ncorrect password, the transcever remans locked.
A
DJUSTING THE
Press the Volume Up key to ncrease the volume. Press the Volume Down key
to decrease the volume.
If Squelch Off has been programmed onto a key, you can use that functon to
lsten to background nose whle adjustng the volume level.
S Z
ELECTING A ONE AND
Select the desred zone and channel/group ID usng the keys programmed as
Zone Up/ Zone Down and CH/GID Up/ CH/GID Down.
• You can program names for zones and channels/group IDs wth up to 10
characters.
n Home Channel/Group ID
You can select your Home channel/group ID by pressng Home CH/GID.
Press the key a second tme to return to your prevous channel/group ID.
n Direct Channel/Group ID
You can quckly select a commonly used channel/group ID by pressng Direct
CH/GID 1 ~ Direct CH/GID 4. Press the same key a second tme to return to
your prevous channel/group ID (f the key assgnment Drect CH/GID return s
configured as "Enabled").
6

BASIC OPERATIONS

ON/ OFF
to select a dgt.
to confirm the password.
V
OLUME
C
HANNEL
/G ID
ROUP