Set / Cancel Button Operation Sound - Uwatec Z1 User Manual

6-4. Set / Cancel Button Operation Sound

You can select the operation sound ON / OFF when the button is pressed.
The default is the operation sound ON.
How to set
1. In watch mode or surface mode, hold down ADJUST button for 2 seconds
or longer.
After [SET] and [Hold] flashes, release the finger when the city code and
the city name are displayed so that it will flow following the display of [CITY]
for about 1 second.
2. Press MODE button 9 times.
The screen to select ON / OFF of operation sound will be displayed.
•[Key ] or [MUTE] is displayed.
♪
3. Press PLAN button to select [key ] (with operation sound) or [MUTE]
♪
(no operation sound).
4. Press ADJUST button
When the setting is completed, it will return to watch mode or surface
mode.
Ref.
• Alarm sound, time signal, timer sound, warning sound will sound even if
you set the operation sound to off .
26