Timer(Tmr); To Enter The Countdown Timer Mode; Set Timer - Uwatec Z1 User Manual

13. Timer(TMR)

Can be used in watch mode or surface
mode.
The timer can be set from 1 minute to 24
hours.
The time-up sound will be heard for 10
seconds when the time is up.

13-1. To Enter the Countdown Timer Mode

Press MODE button 4 times in watch mode or surface mode to select
the Countdown Timer Mode (TMR). About 1 second after TMR appears
on the display, the display will change to show the countdown time
hours.
Ref. Mode types and how to switch them• • • P.18

13-2. Set Timer

1. Enter the Countdown Timer Mode.
• If a countdown is in progress, press PLAN to stop it and then press AD-
JUST to reset to the current countdown start time.
• If a countdown is paused, press ADJUST to reset to the current count-
down start time.
2. Hold down ADJUST for at least two seconds.
After [SET] [Hold] flashes, release the finger when the "hour" indication on
the timer flashes.
3. Press MODE to move the blinking between the hour and minute settings.
The one you selected will be blinking.
4. Use PLAN and LED/LOG to change the blinking item.
• Press and hold PLAN or LED / LOG button to fast-forward.
• To set the starting value of the countdown time to 24 hours, set 0H
00'00.
5. Press ADJUST to exit the setting screen.
• If you do not operate anything for 2 to 3 minutes, it automatically ends
the setting screen.
62