LCN 4020 Product Manual page 62

LCN 4110 SERIES
H-CUSH ARM 4110-3049CNS
Optional non-handed arm provides hold-open function with
templated stop/hold-open points.
Handle controls hold-open function.
SPRING CUSH ARM, 4110-3077SCNS
Optional, non-handed parallel arm for abusive applications
features solid forged steel main arm and forearm with spring
loaded stop in the soffit shoe.
SPRING H-CUSH ARM, 4110-3049SCNS
Optional, non-handed parallel arm for abusive applications
features solid forged steel main arm and forearm with spring
loaded stop in the soffit shoe. Handle controls hold-open
function.
INSTALLATION ACCESSORIES
PLATE, 4110-18
Required for push side mount where top rail is less than 5 1/8"
(130 mm), measured from the stop.
Plate requires minimum 2" (51 mm) minimum top rail.
Plate also used with CUSH Arm installations.
CUSH SHOE SUPPORT, 4110-30
Provides anchorage for fifth screw used with CUSH arm,
where reveal is less than 3 1/16" (78 mm).
BLADE STOP SPACER, 4110-61
Lowers parallel arm shoe to clear 1/2" (13 mm) blade stop
PA FLUSH PANEL ADAPTER, 4110-419
Provides horizontal mounting surface for EDA or CUSH shoe on
single rabetted or flush frame.
18
LCN CLOSERS
121 W. RAILROAD AVE.
62
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
3049CNS
3077SCNS
3049SCNS
30
61
419
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10