Advertisement
Quick Links
4000 SERIES
PRODUCT SELECTION GUIDE
Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation,
and superior performance. This guide is based on the desired mounting of the closer.
NOTE: For 4040 parallel mountings order "P" version to also receive PA shoe.
E X T E R I O R
D O O R
I N T E R I O R
D O O R
D O U B L E
LEVER ARM
4020
P4040 4110
P4030 4210*
4030
* INDICATES HIGH SECURITY CLOSER. REFER TO THAT SECTION OF THE CATALOG.
"P" = PARALLEL ARM MOUNTING
PRODUCT COMPARISON
This chart shows a basic comparison of 4000 Series Closers.
Refer to the specific closer chapter for complete details.
Available
Closer available with less than 5.0 lbs. opening force on 36" door.
**Maximum opening/hold-open point with standard template. See individual closer series
Not available
for degrees of opening per installation.
*** Advanced Variable Backcheck
PUSH SIDE
M O U N T E D
D O U B L E
LEVER ARM
4020
4040
P4040 4110
4210*
PUSH SIDE
M O U N T E D
S I N G L E
LEVER ARM
4040
4110T
4040T
4210T*
1
PULL SIDE
M O U N T E D
D O U B L E
LEVER ARM
4010 4040
4510*
PULL SIDE
M O U N T E D
D O U B L E
S I N G L E
LEVER ARM
LEVER ARM
4010 4030
4000T 4010T
4040 4510*
4020T 4510T*
4040T 4030T
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
©2010 Ingersoll-Rand Company
Advertisement
Related Manuals for LCN 4020
Summary of Contents for LCN 4020
- Page 1 4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on the desired mounting of the closer. NOTE: For 4040 parallel mountings order “P” version to also receive PA shoe.
-
Page 2: Warranty
Phillips head wood and self-tapping machine screws to install the FAX 800-248-1460 (Customer Service), Fax 815-879-1495 for c l o s e r .Standard LCN thru bolts (TB) can be installed on 1 3/4” (44 mm) Application Engineering. thick doors with 1/4-20 machine screws. Optional thru bolt (TB) sizes WARRANTY are available for 1 5/8”... - Page 3 4010 SERIES The 4010 SMOOTHEE is LCN’s ® best performing heavy duty HINGE (PULL) SIDE MOUNT closer designed specifically for institutional and other rugged high traffic applications. Ten Million Cycles Cast Iron Forged Steel Main Arm Double Heat Treated Steel...
- Page 4 Delays closing from maximum opening to approximately 70°. Special Templates Customized installation templates Delay time adjustable up to approximately 1 minute. or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 5 Optional, handed arm releases hold-open function when 3049FL exposed to temperatures above 165° F. 1/8” (3 mm) maximum reveal. NOTE: Check local codes before specifing FL arms. NOT A LIFE SAFETY PRODUCT! LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
-
Page 6: Installation Accessories
4010 SERIES INSTALLATION ACCESSORIES PLATE, 4010-18 Required where top rail is less than 3 3/4” (95 mm). Plate requires minimum 2” (51 mm) top rail. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100... - Page 7 4010 SERIES HOW-TO-ORDER TABLE OF SIZES Select closer based on width of door. The spring power of non-sized 4011 cylinder is adjustable from size 1 through 4010 SERIES CLOSERS size 5 and is shipped set to size 3. Sized 4010 series cylinder available in size 6. 1.
- Page 8 Notes LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 9 4010T SERIES The 4010T SMOOTHEE is LCN’s ® best performing heavy duty HINGE (PULL) SIDE MOUNT track closer designed specifically for interior doors in institutional and other rugged high traffic applications. Cast Iron Forged Steel Arm Double Heat Treated Steel...
- Page 10 Clearance of 2 1/4” (57 mm) behind door required for 90° or 180° installation. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 11 Will accept bumper assembly. 3038 3038B HOLD-OPEN TRACK with BUMPER, 4010T-3038HB 3038H 3038HB Optional, non-handed track with hold-open clip and bumper assembly installed. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 12 Hold-open point controlled by clip location. Consists of clip and mounting screws. TRACK ROLLER, 4010T-3034 3034 Quiet, low friction roller assembly. Shoulder dimension "X" = 1/16" (2mm). LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 13 * Specify door thickness if other than 1 3/4”. 8.5* lbs. INSTALLATION ACCESSORY 5.0* lbs. 4011T 4011T 4011T Plate, 4010T-18 * Maximum opening force SPECIAL TEMPLATE ST- _________ LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 14 Notes LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 15 Optional SRI primer for installations in corrosive conditions is available with powder coat only. The 4020 Series is UL and cUL listed with regular or fusible link arms for self-closing doors. Tested and certified under ANSI Standard A156.4, grade one.
- Page 16 LONG ROD and S H O E ( 4 0 2 0 - 7 9 L R ) . Options Head Frame less than 3 7/16” (87 mm) requires PLATE, 4020-18 Size 6 or non-sized cylinder.
- Page 17 4020 SERIES CYLINDERS 3071 CYLINDER, 4020-3071 Standard, handed cast iron cylinder assembly. For various applications see “Table of Sizes” on 4020 Series page 18. COVERS COVER, 4020-72 Standard, handed plastic cover. METAL COVER, 4020-72MC Optional, handed cover. Required for plated finishes and custom powder coat finishes.
- Page 18 The spring power of non-sized 4021 cylinder is adjustable from size 1 through 4020 SERIES CLOSERS size 5 and is shipped set to size 3. Sized 4020 series cylinder available in size 6. 1. SELECT CYLINDER SIZE Delayed action not available with 4026 cylinder.
- Page 19 4020T SERIES is LCN’s The 4020T SMOOTHEE ® best performing heavy duty TOP JAMB (PULL SIDE) MOUNT track closer designed specifically for interior doors in institutional and other high traffic applications. Cast Iron Forged Steel Arm Double Heat Treated Steel...
- Page 20 Metal cover. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 21 3038B 3038H Will accept bumper assembly. 3038HB HOLD-OPEN TRACK with BUMPER, 4020T-3038HB Optional, non-handed track with hold-open clip and bumper assembly installed. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 22 Hold-open point controlled by clip location. Consists of clip and mounting screws. 3054 TRACK ROLLER, 4020T-3034 3034 Quiet, low friction roller assembly. Shoulder dimension "X"= 1/16" (2mm). LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 23 42" 48" INSTALLATION ACCESSORY 8.5* lbs. Plate, 4020T-18 5.0* lbs. 4021T 4021T 4021T SPECIAL TEMPLATE * Maximum opening force ST- _________ LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 24 Notes LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 25 Closer available with less than 5.0 lbs. opening force on 36" door. Not available **Maximum opening/hold-open point with standard template. See individual closer series for degrees of opening per installation. *** Advanced Variable Backcheck PHONE 800-526-2400 LCN CLOSERS FAX 800-248-1460 121 W. RAILROAD AVE. www.lcn.ingersollrand.com P.O. BOX 100 3/10...
-
Page 26: Hinge (Pull) Side Mounting
Clearance of 1 3/4” (44 mm), behind door required for installation. Options Hold-open arm. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com... - Page 27 Hold-open arm. Long arm. Long Hold-open arm. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. PHONE 800-526-2400 LCN CLOSERS FAX 800-248-1460 121 W. RAILROAD AVE. www.lcn.ingersollrand.com P.O. BOX 100 3/10...
- Page 28 CUSH or HCUSH arm. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. 4030 closers ordered with EDA arms include 4030-201 FIFTH HOLE SPACER to support the shoe. LCN CLOSERS PHONE 800-526-2400 121 W.
- Page 29 CUSH or SPRING CUSH ARM requires SHOE SUPPORT, 4030-30 for fifth screw anchorage where reveal is less than 3 1/16” (78 m m ) . PHONE 800-526-2400 LCN CLOSERS FAX 800-248-1460 121 W. RAILROAD AVE. www.lcn.ingersollrand.com P.O. BOX 100 3/10...
- Page 30 Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 31 Consult factory. PA FLUSH PANEL ADAPTER, 4030-419 Provides horizontal mounting surface for CUSH shoe on single rabetted or flush frame. PHONE 800-526-2400 LCN CLOSERS FAX 800-248-1460 121 W. RAILROAD AVE. www.lcn.ingersollrand.com P.O. BOX 100 3/10...
- Page 32 PA Flush Panel Adapter, 4030-419 SPECIAL TEMPLATE 8.5* lbs. 4031 4031 4031 ST- ________ 5.0* lbs. 4031 4031 4031 * Maximum opening force LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 33 Closer available with less than 5.0 lbs. opening force on 36" door. Not available **Maximum opening/hold-open point with standard template. See individual closer series for degrees of opening per installation. *** Advanced Variable Backcheck LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 34 Clearance of 1 3/4” (44 mm) behind door required for installation. Options Hold-open track. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 35 Head Frame requires 2 7/8” (73 mm) minimum. Options Hold-open track. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 36 Stop Width minimum 1 1/4” (32 mm). Options Hold-open track. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 37 3038H the door. Comes with 4030T-3054 Hold-open clip. HOLD-OPEN CLIP, 4030T-3054 Mounts in track to provide hold-open function. Hold-open point controlled by clip location. 3054 LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 38 DOOR WIDTH 36" 42" 48" 8.5* lbs. 5.0* lbs. 4031T 4031T 4031T * Maximum opening force LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 39 4040 SERIES The 4040 SUPER SMOOTHEE ® CLOSER MOUNTS LCN’s most flexible heavy duty HINGE (PULL SIDE) (Shown) closer designed for institutional TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) and other rugged high traffic applications. Ten Million Cycles Cast Iron...
- Page 40 4040 SERIES 4040XP The 4040XP is LCN’s most durable heavy duty closer designed for the most demanding, high use and abuse applications. 44% increased bearing load capacity Strongest pinion ever- at 3/4” journal diameter Widest bearing ever- at 5/8” Stronger pinion teeth New V-shield™...
- Page 41 (eg. 4041 DEL). Delays closing from 120° to 70°. Delay time adjustable up to approximately 1 minute. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 42 Either plate requires 1 3/4” (44 mm) minimum. solve unusual applications. Contact LCN for assistance. Delayed Action (not available on 4040XP) Add suffix “DEL” to selected cylinder (eg. 4041 DEL). Delays closing from 120° to 80°.
- Page 43 (eg. P4041 DEL). Delays time adjustable up to approximately 1 Special Templates minute. Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 44 115˚ with 180˚ template. 95˚ with 110˚ template. 85˚ with 100˚ template. 75˚ with 90˚ template. Delay time adjustable up to approximately 1 minute. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 45 EDA ARM w/THICK HUB SHOE, 4040-3077EDAG Optional for blade stop clearance, requires special templating. HEDA ARM w/THICK HUB SHOE, 4040-3049EDAG Optional for blade stop clearance, requires special templating. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
-
Page 46: Installation Accessories
Required for parallel arm mounting where top rail is less than 5 1/2” (140 mm), measured from the stop. Plate requires 2” (51 mm) minimum top rail. 18PA LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com... - Page 47 PA or CUSH shoe on single rabetted or flush frame. AUXILIARY SHOE, 4040-62A requires a top rail of 7” (178 mm). Optional shoe replaces -62PA for parallel arm mounting of regular arm with overhead holder/stop. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 48 Plate, 4040-18PA CUSH Shoe Support, 4040-30 Blade Stop Spacer, 4040-61 Auxiliary Shoe, 4040-62A PA Flush Panel Adapter, 4040-419 SPECIAL TEMPLATE ST- ________ LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 49 Plate, 4040-18PA CUSH Shoe Support, 4040-30 Blade Stop Spacer, 4040-61 Auxiliary Shoe, 4040-62A PA Flush Panel Adapter, 4040-419 SPECIAL TEMPLATE ST- ________ LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 50 Notes LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 51 4040T SERIES The 4040T SMOOTHEE is LCN’s ® CLOSER MOUNTS most flexible heavy duty track HINGE (PULL) SIDE (Shown) TOP JAMB (PULL SIDE) closer designed specifically for STOP FACE (PUSH SIDE) interior doors in institutional and other rugged high traffic applications.
- Page 52 Clearance of 2 1/4” (57 mm) behind door required for 90° installation. applications. Consult factory Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 53 Clearance of 1 1/4” (32 mm) behind door required for 180° installation. track with bumper. Metal cover. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 54 Metal cover. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 55 Optional, non-handed track with hold-open clip installed. Will accept bumper assembly. HOLD-OPEN TRACK with BUMPER, 4040T-3038HB Optional, non-handed track with hold-open clip and bumper assembly installed. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 56 Hold-open point controlled by clip location. 3034 Consists of clip and mounting screws. TRACK ROLLER, 4040T-3034 Quiet, low friction roller assembly. Shoulder dimension "X" = 1/8" (3mm). LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 57 ST- _________ DOOR WIDTH 36" 42" 48" 8.5* lbs. 5.0* lbs. 4041T 4041T 4041T * Maximum opening force LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 58 Notes LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 59 4110 SERIES The 4110 SMOOTHEE is LCN’s ® best performing heavy duty closer *PARALLEL ARM (PUSH SIDE) MOUNT designed specifically for institutional and other rugged high traffic applications. Ten Million Cycles Cast Iron Extra Duty Forged Steel Arm Standard Double Heat Treated Steel...
- Page 60 75°. Add suffix “AVB” to selected cylinder. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 61 62FL SAFETY PRODUCT! CUSH-N-STOP ARM, 4110-3077CNS Optional, non-handed parallel arm features solid forged steel main arm and forearm with built-in stop in soffit shoe. 3077CNS LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 62 Lowers parallel arm shoe to clear 1/2” (13 mm) blade stop PA FLUSH PANEL ADAPTER, 4110-419 Provides horizontal mounting surface for EDA or CUSH shoe on single rabetted or flush frame. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O.
- Page 63 4110 SERIES TABLE OF SIZES HOW-TO-ORDER Select closer based on width of door. The spring power of non-sized 4111 cylinder is adjustable from size 1 through 4110 SERIES CLOSERS size 5 and is shipped set to size 3. 1. SELECT CYLINDER SIZE Sized 4110 series cylinder 6.
- Page 64 Notes LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 65 4110T SERIES The 4110T SMOOTHEE ® LCN’s best performing heavy STOP FACE (PUSH SIDE) MOUNT duty track closer designed specifically for interior doors in institutional and other high traffic applications. Cast Iron Forged Steel Main Arm Double Heat Treated Steel...
- Page 66 Stop Width minimum 1 1/4” (32 mm). Metal cover. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 67 Optional, non-handed track with hold-open clip installed. Will accept bumper assembly. HOLD-OPEN TRACK with BUMPER, 4110T-3038HB Optional, non-handed track with hold-open clip and bumper assembly installed. LCN CLOSERS PHONE 800-526-2400 FAX 800-248-1460 121 W. RAILROAD AVE. www.lcn.ingersollrand.com P.O. BOX 100...
- Page 68 Consists of clip and mounting screws. 3054 3034 TRACK ROLLER, 4110T-3034 Quiet, low friction roller assembly. Shoulder dimension "X" = 1/16" (2 mm). LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 69 Plate, 4110T-18 DOOR WIDTH 36" 42" 48" SPECIAL TEMPLATE 8.5* lbs. ST- _________ 5.0* lbs. 4111T 4111T 4111T * Maximum opening force LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 70 Notes LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100 3/10...
- Page 71 Tested and certified under ANSI Standard A156.4, grade one. Available **Maximum opening/hold-open point with standard template. Not available *** Advanced Variable Backcheck LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 72 See Fire Life Safety Section. Options Metal cover. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN for assistance. LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...
- Page 73 Will not accept hold-open clip or bumper assembly. TRACK ROLLER, 4000T-3034 Quiet, low friction roller assembly. Shoulder Dimension "X"= 1/8" (3 mm). 3038 3034 LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com PRINCETON, IL, USA 61356-0100...
- Page 74 TB*, Wood & Machine Screw (TBWMS) TORX Machine Screw (TORX) TB* & TORX Machine Screw (TBTRX) * Specify door thickness if other than 1 3/4”. SPECIAL TEMPLATE ST- _________ LCN CLOSERS PHONE 800-526-2400 121 W. RAILROAD AVE. FAX 800-248-1460 P.O. BOX 100 www.lcn.ingersollrand.com...