Advertisement
LCN
4010 SERIES
HINGE (PULL) SIDE
MOUNTING
MAXIMUM OPENING
Can be templated for 100°,
A = 5 15/16" (151 mm)
B = 11 15/16" (303 mm)
or 140°.
A = 4 3/16" (106 mm)
B = 10 3/16" (259 mm)
Hold-open points up to maximum
opening with hold-open arm.
Arm Clearance above door.
Regular arm requires C =
1 1/16" (27 mm).
Hold-open arm requires C =
1 3/8" (35 mm).
Fusible link arm requires C =
1 5/8" (41 mm).
Options
Size 6 or non-sized cylinder.
Delayed action cylinder.
Hold-open or fusible link arm.
Metal cover.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
Butt Hinges should not exceed 5" (127 mm) in width.
Auxiliary Stop is recommended at hold-open point or where a door
cannot swing 140°.
Reveal should not exceed 3/4" (19 mm). Fusible link arm should not
exceed 1/8" (3 mm).
Top Rail less than 3
/
" (95 mm) requires PLATE, 4010-18.
3
4
Plate requires 2" (51 mm) minimum.
Clearance of 2 1/4" (57 mm) behind door required for 90° installation.
Delayed Action Add suffix "DEL" to selected cylinder.
Not available with 4016 cylinder.
Delays closing from maximum opening to approximately 70°.
Delay time adjustable up to approximately 1 minute.
4
LCN CLOSERS
PHONE 800-526-2400
121 W. RAILROAD AVE.
FAX 800-248-1460
P.O. BOX 100
www.lcn.ingersollrand.com
PRINCETON, IL, USA 61356-0100
3/10
Advertisement
