Advertisement
LCN
4010T SERIES
HINGE (PULL) SIDE
MOUNTING
MAXIMUM OPENING
Templating allows 180° with
standard arm, limited to
120° when optional bumper is
installed.
Consult factory if door will be held
open at 180°
Hold-open points at , 90°, 95°, 100°,
105°, 110° or 120°, depending on the
clip location in track.
Please note that many track style door
closers are capable of allowing 180°
of door swing. Be aware that the
majority of track style closers are at
their weakest closing force in the
180 – 130° range. Consult factory for
applications where exterior or
large/heavy door must swing 180°.
Options
Standard track with bumper,
hold-open track, hold-open
track with bumper.
Double egress arm.
Metal cover.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
Butt Hinges should not exceed 5" (127 mm) in width.
Auxiliary Stop is recommended at hold-open point or where a door
cannot swing 180°.
Optional track bumper assembly assists backcheck in cushioning the
opening swing of the door. It is not intended to replace an auxiliary stop.
Reveal should not exceed 1/8" (3 mm) for standard arm.
Should not exceed 3 5/16" (84 mm) for double egress arm.
Top Rail less than 3 3/4" (95 mm) requires PLATE, 4010T-18.
Plate requires 2" (51 mm) minimum.
Head Frame requires 1 1/2" (38 mm) minimum.
Clearance of 2 1/4" (57 mm) behind door required for 90° or 180°
installation.
10
LCN CLOSERS
PHONE 800-526-2400
121 W. RAILROAD AVE.
FAX 800-248-1460
P.O. BOX 100
www.lcn.ingersollrand.com
PRINCETON, IL, USA 61356-0100
3/10
Advertisement
