Yamaha TT250RA Owner's Manual page 52

PERIODIC MAINTENANCE AND ADJUSTMENT
1
1
2
3
1. Air filter element
4
4. Remove the sponge material from
the air filter element frame.
5
1
6
7
2
8
9
1. Sponge material
2. Air filter element frame
5. Clean the sponge material with
solvent, and then squeeze the re-
maining solvent out.
6. Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
TIP
The sponge material should be wet but
not dripping.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
7. Install the sponge material onto
the frame, and then insert the air
filter element into the air filter case.
8. Place the air filter case cover in the
original position, and then tighten
the fasteners. NOTICE: Make
sure that the air filter element is
7-13
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.
9. Install the panel.
[ECA10481]