Seat; Helmet Holder - Yamaha TT250RA Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
Remove the bolts, and then pull the
1
seat off.
2
3
1
4
5
1. Bolt
6
To install the seat
7
1. Insert the projections on the front
of the seat into the seat holders as
8
shown.
9
EAU13960
1
2
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
TIP
Make sure that the seat is properly se-
cured before riding.

Helmet holder

1. Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key. WARNING! Never ride with a
helmet attached to the helmet hold-
er, since the helmet may hit objects,
causing loss of control and possibly
an accident.
4-9
EAU14282
1
[EWA10161]