Yamaha TT250RA Owner's Manual page 31

1
(b)
(a)
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
16 click(s) in direction (b)*
Standard:
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting dial fully turned in
direction (a)
Compression damping force
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting knob
in direction (a). To decrease the com-
pression damping force and thereby
soften the compression damping, turn
the adjusting knob in direction (b).
INSTRUMENT AND CONTROL FUNCTIONS
(b)
1. Compression damping force adjusting
knob
Compression damping setting:
Minimum (soft):
5 click(s) in direction (a)*
Standard:
8 click(s) in direction (a)*
Maximum (hard):
15 click(s) in direction (a)*
* With the adjusting knob fully turned in
direction (b)
TIP
To obtain a precise adjustment, it is ad-
visable to check the actual total number
of clicks or turns of each damping force
adjusting mechanism. This adjustment
range may not exactly match the spec-
ifications listed due to small differences
4-12
in production.
1
WARNING
(a)
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
G
Do not tamper with or attempt to
open the cylinder assembly.
G
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
G
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
G Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
EWA10221
2
3
4
5
6
7
8
9