Rear Wheel - Yamaha TT250RA Owner's Manual

bounds smoothly.
8. Connect the speedometer cable.
PERIODIC MAINTENANCE AND ADJUSTMENT

Rear wheel

To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Remove the cotter pin, and then
loosen the axle nut.
3
2
1
1. Cotter pin
2. Axle nut
3. Drive chain adjusting plate
2. Lift the rear wheel off the ground
according to the procedure on
page 7-32.
7-34
EAU25080 3. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.
EAU25262
EWA10821
TIP
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
4. Remove the axle nut.
5. Pull the wheel axle out.
6. Remove the spacer, the drive
chain adjusting plates, and the
wheel.
To install the rear wheel
1. Install the drive chain onto the rear
sprocket.
2. Install the wheel axle, spacer, and
2
3
4
5
6
7
8
9
EAU25541