Replacing A License Plate Light Bulb - Yamaha TT250RA Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a license plate light
bulb
1. Remove the license plate light unit
1 by removing the nuts, washers
and rubber dampers.
2
1
2
3
3
4
5
6
1. Nut
2. Washer
3. Rubber damper
7
2. Remove the license plate light lens
by removing the nuts and wash-
8
ers.
9
EAU24324
1
1. Nut
2
2. Washer
3
3. Remove the burnt-out bulb by pull-
ing it out.
1
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the license plate light
lens by installing the washers
7-31
and the nuts.
6. Install the license plate light unit by
installing the rubber dampers,
1
washers and the nuts.
2