Set Lengths For Discrete 2 Of 5 - Philips SpeechMike Configuration Manual

Hide thumbs Also See for SpeechMike:

Table of Contents

Advanced Scanner Configuration Guide

Set Lengths for Discrete 2 of 5

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)

the code contains. Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a

specific range.

One Discrete Length - Select this option to decode only those codes containing a selected length. For example,

select D 2 of 5 One Discrete Length, then scan 1, 4, to decode only D 2 of 5 symbols

containing 14 characters.

Numeric bar codes begin on page 51. To change the selection or cancel an incorrect entry, scan the Cancel bar

code on page 51.

D 2 of 5 - One Discrete Length

Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example,

select D 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only D 2 of 5 symbols containing 2 or 14

characters. Numeric bar codes begin on page 51. To change the selection or cancel an incorrect entry, scan the

Cancel bar code on page 51.

D 2 of 5 - Two Discrete Lengths

Length Within Range - Select this option to decode codes within a specified range. For example, to decode D 2

of 5 symbols containing between 4 and 12 characters, first scan D 2 of 5 Length Within Range, then scan 0, 4, 1

and 2 (single digit numbers must be preceded by a leading zero). Numeric bar codes begin on page 51. To change

the selection or cancel an incorrect entry, scan the Cancel bar code on page 51.

D 2 of 5 - Length Within Range

Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters.

Note: Selecting this option may lead to misdecodes for D 2 of 5 codes.

D 2 of 5 - Any Length

Revision: 2.0 , technical changes excepted

Table of Contents