Advanced Scanner Configuration Guide
27
Code 32 Prefix
Enable this parameter to add the prefix character "A" to all Code 32 bar codes.
Convert Code 39 to Code 32
must be enabled for this parameter to function.
(Italian Pharma Code)
Enable Code 32 Prefix
*Disable Code 32 Prefix
Set Lengths for Code 39
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Lengths for Code 39 may be set for any length, one or two discrete lengths, or lengths within a
specific range. If Code 39 Full ASCII is enabled, Length Within a Range or Any Length are the preferred options.
When setting lengths, single digit numbers must always be preceded by a leading zero.
One Discrete Length - This option limits decodes to only those Code 39 symbols containing a selected length.
Lengths are selected from the numeric bar codes beginning
on page 51. For example, to decode only Code 39
symbols with 14 characters, scan Code 39 - One Discrete Length, then scan 1 followed by 4. To change the
selection or cancel an incorrect entry, scan Cancel on page 51.
Code 39 - One Discrete Length
Two Discrete Lengths - This option limits decodes to only those Code 39 symbols containing either of two
selected lengths. Lengths are selected from the numeric bar codes beginning on page 51. For example, to decode
only those Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then
scan 0, 2, 1, and then 4. To change the selection or cancel an incorrect entry, scan Cancel on page
51.
Code 39 - Two Discrete Lengths
Revision: 2.0 , technical changes excepted