Convert Upc-E1 To Upc-A; Ean Zero Extend - Philips SpeechMike Configuration Manual

Advanced Scanner Configuration Guide 21

Convert UPC-E1 to UPC-A

Enable this parameter to convert UPC-E1 (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming
selections (e.g., Preamble, Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E1 (zero suppressed) decoded data.
Convert UPC-E1 to UPC-A (Enable)
*Do Not Convert UPC-E1 to UPC-A (Disable)

EAN Zero Extend

When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in
format to EAN-13 symbols.
Disable this parameter to transmit EAN-8 symbols as is.
Enable EAN Zero Extend
*Disable EAN Zero Extend
Revision: 2.0 , technical changes excepted