Table of Contents
Advertisement
Advanced Scanner Configuration Guide
De c o de UPC/EAN Supplementals
Supplementals are appended characters (2 or 5) according to specific code format conventions (e.g., UPC A+2,
UPC E+2).
Several options are available:
Decode UPC/EAN with Supplemental characters is selected, the scanner does not decode
UPC/EAN symbols without supplemental characters.
Ignore UPC/EAN with Supplemental characters is selected, and the
SE-955 is presented with a UPC/EAN symbol with a supplemental, the scanner decodes the UPC/EAN and
ignores the supplemental characters.
Autodiscriminate UPC/EAN Supplementals is selected, scan Autodiscriminate UPC/EAN
Supplementals on
of 5 or more is recommended.
elect Enable 378/379 Supplemental Mode to enable the SE-955 to identify supplementals for EAN-1 3
bar codes starting with a '378' or '379' prefix only. All other UPC/EAN bar codes are decoded immediately
and the supplemental characters ignored.
elect Enable 978 Supplemental Mode to enable the SE-955 to identify supplementals for EAN-1 3 bar
codes starting with a
supplemental characters ignored.
elect Enable Smart Supplemental Mode to enable the SE-955 to identify supplementals for EAN-1 3
bar codes starting with a '378', '379', or '978' prefix only. All other UPC/EAN bar codes are decoded
immediately and the supplemental characters ignored.
Note: To minimize the risk of invalid data transmission, we recommend selecting whether
to read or ignore supplemental characters.
Select the desired option by scanning one of the following bar codes.
page
16,
then select a value from the numeric bar codes beginning on
'
'
978
prefix only. All other UPC/EAN bar codes are decoded immediately and the
Decode UPC/EAN With Supplementals
*Ignore UPC/EAN With Supplementals
Revision: 2.0 , technical changes excepted
15
page
51.
A value
Advertisement
Table of Contents
