Mute Calls; 3-Way Conference - ATCOM A68 User Manual

A68(W) IP Phone User Manual
Operating steps: Press "Transfer" soft key to get more option, then press "Blind" soft key,
input the transfer target number and press "Send" soft key.
If the target number has been setup in the current BLF list, and you have already finished the
necessary setup on Webpage of A68(W), there is an easier way to complete the Blind transfer.
While calling, press the corresponding BLF key of the target number, the blind transfer will be
achieved.

3.6. Mute calls

The input audio will be not transmitted to peer phone after pressing
phone will be muted even switched among different modes of speaker, handset and headset.
To un-mute, just press

3.7 3-Way Conference

1. While on calling, press the soft key "Conf", input the 3
press the softkey "Dial" or press the soft key "Conf" and press the corresponding BLF key
to invite the 3 party to join a conference call.
rd
2. After the third party answers the call, pressing "Conf" key again to establish the 3-way
conference
3. The initiator of 3-way conference can press the soft key "Hold" to hold the conversation
with other two parties, and press "Resume" to back to 3-way conference.
4. If the initiator hangs up the call or press the soft key "End Conf", the conference will be
ended and the calling between the other two parties will be hung up as well.
5. The initiator of 3-way conference can press the soft key "Split" to separate the conference
call, and the calling between initiator and the other two parties are still active but under the
status of Call hold.
6. After split the 3-way conference, press the soft key "More" and then press the softkey
"Join" to resume the 3-way conference or press the softkey "Conf" to setup a new 3-way
conference call.
ATCOM TECHNOLOGY CO., LIMITE
key again.
23
www.atcom.cn
party's phone number and then
rd
key, and the