Mute Calls; 3-Way Conference - ATCOM D2X User Manual

D2X IP Phone User Manual
If the target number has been setup in the current BLF list, and you have already finished the
necessary setup on Webpage of D2X, there is an easier way to complete the Blind transfer.
While calling, press the corresponding BLF key of the target number, the blind transfer will be
achieved.

3.6. Mute calls

The input audio will be not transmitted to peer phone after pressing
phone will be muted even switched among different modes of speaker, handset and headset.
To un-mute, just press

3.7. 3-Way Conference

1. While on calling, press the soft key "Conf", input the 3
press the softkey "Dial" or press the soft key "Conf" and press the corresponding BLF key
to invite the 3 party to join a conference call.
rd
2. After the third party answers the call, pressing "Conf" key again to establish the 3-way
conference.
1. New call
1.1. While on the Conf call, the initiator can press the 'New call' soft key to dial the call,
then press the 'Conf' soft key join the conf room;
1.2. Or when there is a new call incoming, answered the call, and press the 'Conf' soft key,
the more can add 3-ways in the conf room.
2. Mut
ATCOM TECHNOLOGY CO., LIMITE
key again.
22
www.atcom.cn
party's phone number and then
rd
key, and the