Cleaning And Maintenance; Component Cleaning - Haier HYC-260 Operation Manual

HYC-290/390
Door ajar
alarm switch
Door lock
Interior light
Battery
switch
Handle
Glass door
Shelf
Caster
14
Control panel
Light switch
USB port(Optional)
Leveling leg

Cleaning and Maintenance

Component Cleaning

To avoid electric shock or personnel injuries, make sure to power off the
refrigerator before any repair work or maintenance is performed.
Make sure no drug or aerosol around the refrigerator is inhaled during
maintenance, otherwise your health will be threatened.
Refrigerator cleaning
The refrigerator should be cleaned once a month to keep the appearance new and reduce the
chance for gem formation.
Use a damp cloth to clean off dust on the refrigerator. If necessary, use light detergent water to
wipe off the unit if necessary. Then use a dry cloth to wipe it again.
Do not dump water directly onto the interior of the unit to avoid damage to electrical systems.
Compressor and other mechanical parts are hermetically sealed. They don't need lubrication.
Lamp replacement
(1) HYC-260/360 is equipped with a fluorescent lamp on the upper front part of the refrigerator.
When you change the tube, please pay attention:
Unplug the power cord.
Remove the lamp cover.
Remove the tube.
Replace the original florescent lamp with a new lamp.
Switch on the power.
Replacement lamp must have the same specification as the original one.
If the starter is defective, remove the old starter and install a new starter.
(2)HYC-290/390/390F/610/890/940/940F is equipped with a LED lamp. To replace the lamp,
please contact the service department.
Purchasing chart paper for temperature chart recorder
The chart recorder papers are imported chart papers designed for the recorder. The papers that are
supplied with the unit usually last about half of a year. When you are running short of the chart paper,
please contact Haier to purchase more. The lead time to deliver the charts is 15 days after receiving
the payment . Please call Haier for details.
31