Application Guidelines; Cleaning And Maintenance; Component Cleaning - Haier HYC-68 Operation Manual

Application guidelines

Make sure the temperature inside the refrigerator has reached the set value and put articles in the
refrigerator by batch. Volumes accounted by articles shall not be greater than 1/3 of refrigerator to
prevent rise of temperature.
The temperature display value of refrigerator refers to the temperature value at the temperature
sensing probe inside the refrigerator. Though the temperature displayed is different from the actual
one at the center of refrigerator, it will approach to the real temperature gradually.
Clean the refrigerator with mild detergent water. Brushes, acids, gasoline, soap powders,
polishing powders or hot water are prohibited to clean refrigerator as these materials may damage
the painting surface and plastic & rubber components and parts. Never wipe the plastic & rubber
components and parts with volatile solvent such as gasoline.
Shut off the power if the refrigerator will be out-of-service for a long time.
Reduce the time of keeping door open when storing or taking articles each time, to prevent great
fluctuation to the temperature and humidity inside the refrigerator.
The refrigerator will see a sharp temperature increase in a short time when the door is opened,
which is normal, and the temperature will resume 1h after the door is closed.
The refrigerator shall operate with ambient temperature as 10~32℃ and humidity less than 60%;
condensation will occur on the glass door(HYC-68A) in high temperature and high humidity
condition, which is normal and will not affect the storage temperature inside the refrigerator; in
the event of condensation, please improve ventilation conditions as soon as possible and reduce
ambient temperature simultaneously.
Please keep the article inside at least 20mm away from the cabinet back wall！
The maintenance should be supplied by professional after-sales service people once the
equipment is faulty.
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities.Contact you local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into
the groundwater and get into the food chain, damaging your health and well-being.When replacing
old appliances with new ones, the retailer is legally obligated to take back your old appliance for
disposals at least free of charge.
6

Cleaning and Maintenance

Component Cleaning

To avoid electric shock or staff injuries, please switch off power of the
refrigerator before conducting any repairment or maintenance.
Do not inhale any air borne particles when conducting maintenance on your
refrigerator.
Refrigerator cleaning
Clean the refrigerator once a month. Regular cleaning keeps appearance of the refrigerator new.
Wipe off any dirt with a cleaning cloth with mild detergent water.
Do not dump water on enclosure or inner chamber of the refrigerator, otherwise electrical
apparatus insulation may be damaged, causing occurrence of faults.
The compressor and other mechanical parts are completely sealed. No lubrication is required.
Lamp replacement
The refrigerator is equipped with a LED lamp. The lamp has low energy consumption and long
service life. Any doubt, please contact the after-sales service personnel for changing it.
Remote Alarm Terminals
Remote alarm terminals are installed on the
refrigerator and the alarm signal behind the
compartment is output by the terminals. The
bearing capacity of the terminals is DC 30V, 2A.
Terminal output:
Remote alarm terminals include NO, NC and COM.
The user can choose "NO" or "NC" if needed.
Battery Switch
Battery switch is installed on the back
of the products，with"Battery"label；
Battery switch "I" indicates that battery is on ；
"O" indicates that battery is off。
COM
NO
NC
Battery
HYC-118/118A HYC-68/68A
15