Installing Other Peripherals; Finalizing The Installation; Le Sucre Pre-Configured Parameters - Honeywell SUGPACK-UK Quick Installation Manual

Installing other peripherals

For each device being registered you have the upper message "New Device incoming..." and you will
hear the beeps from the badge reader.

Finalizing the installation

Once all peripherals are registered , finish the installation by clicking on the "Finish" button.
The finalization may take several minutes.

Le Sucre pre-configured parameters

- Peripheral parameter :
- DO8M, SHK8M detectors are :


- IRPI8M, IR8M, CAMIR-F1, DT8M, DTPI8M, FG8M detectors are :


- All Life safety detectors (CO8M, DFS8M) are:

- DET8M detector is:


- CAMIR-F1 parameters:


- Entry/Exit delays:
o
Total partition


o
Partial partition


- Tag reader siren parameters:

- Smoke alarm duration: 300s


Delayed
In partial partition (working in total and partial mode)
Delayed
In total partition (working only in total mode)

Immediate
In 24/24 partition
Immediate
In 24/24 partition
Pictures per set: 5
Time between pictures: 300 ms
Entry delay: 30 s
Exit delay: 30s
Entry delay: 30s
Exit delay: 30s
Intrusion alarm duration: 180s
Entry and exit beeps:
Beeps only present for total arm, silent for partial arm
16