Audible tones for different headset status and functions:
STATUS
Registration mode
Out of range
Battery low
Registration complete
Busy tone
Headset not registered
Base capacity full
Call drop
Volume
There are 5 volume settings. Use the toggle at the rear of the
headset to adjust volume by pressing upwards for each step.
Speech
The headset can be used in 2 speech modes:
- TalkLock:
this mode is hands-free. To activate, press the silver button
for less than 1 second - the headset is then hands-free. To de-activate it,
press the silver button again. This will shut off the microphone.
- PTT:
press the silver button whilst talking, then release when finished.
Up to 6 users can speak at any one time. All headsets hear all the time.
Best practice:
only use TalkLock if you need to be hands-free. Use PTT for
routine communication.
TONE
1 beep every second
2 beeps every 10 seconds
3 beeps every 60 seconds
1 long beep (3 seconds)
3 long beeps
1 beep every 3 seconds
As per busy tone
Bloop-bleep tone
9
Need help?
Do you have a question about the Q-HCBS and is the answer not in the manual?
Questions and answers