Table of Contents
Advertisement
6
Removing the equipment chassis
Open the control panel lid using the two 801 lock key.
Before the chassis can be removed it will be necessary to disconnect the power cables from the
connector terminal block on the left hand side of the PCB.
The chassis is held in place by two screws. Undo the two screws and lift the chassis gently away from
the box towards you.
With the chassis removed, there is much more room inside the panel for making off and dressing cables.
When cabling work is complete, the chassis can be re-fitted and the power cables reconnected.
Important! Ensure the power cables are connected correctly.
TM206
9 of 35
Issue 1.0
Advertisement
Table of Contents
