St Stage Output; Disable Released Output - Kidde FireBeta XT+ Operation And Maintenance Manual

Press the ENTER button to select this function. The yellow disabled LED will be lit and the display will
show:
Turn the ENABLE CONTROL keyswitch off to leave the disablement active. To re-enable the manual
release facility, repeat the procedure above.
15.2.3 Disable Stage 1 output
st
To disable the 1 Stage relay output, press the UP button on the module while at access level 2 until the
display shows:
Press the ENTER button to select this function. The display will show:
The yellow disabled LED will be lit.
Turn the ENABLE CONTROL keyswitch off to leave the disablement active. To re-enable the Stage 1
relay output repeat the procedure above.
15.2.4 Disable Stage 2 output
nd
To disable the 2 Stage relay output, press the UP button on the module while at access level 2 until the
display shows:
Press the ENTER button to select this function. The display will show:
The yellow disabled LED will be lit.
Turn the ENABLE CONTROL keyswitch off to leave the disablement active. To re-enable the Stage 2
relay output repeat the procedure above.

15.2.5 Disable Released output

To disable the Released relay output, press the UP button on the module while at access level 2 until the
display shows:
Press the ENTER button to select this function. The display will show:
The yellow disabled LED will be lit.
TM206 28 of 35 Issue 1.0