Walchem W600 Series Instruction Manual page 11

Metal finishing controller
Hide thumbs Also See for W600 Series:
Table of Contents

Advertisement

Totalizer Alarm
Set Flow Total
Flow Alarm Delay
Flow Alarm Clear
Dead Band
Reprime Time
Volume/Contact
Smoothing Factor
Relay output settings
Output Limit Time
Hand Time Limit
Min Relay Cycle
Set Point
Spike Set Point (Spike mode)
Onset Time (Spike Mode)
Duty Cycle Period (On/Off, Spike, Dual Setpoint modes)
Duty Cycle (On/Off, Spike, Dual Setpoint modes)
On Delay Time (Manual, On/Off, Dual Setpoint modes)
Off Delay Time (Manual, On/Off, Dual Setpoint modes)
Dead Band
Turnover Volume (Plating Control, Plating Follow modes)
Turnover Limit (Plating Control, Plating Follow modes)
Pump Capacity (Plating Control, Plating Follow modes)
Pump Setting (Plating Control, Plating Follow modes)
Feed duration (Flow Timer mode)
Accumulator volume (Flow Timer mode)
Event duration (Timer modes)
Proportional band (Time/Pulse Proportional mode)
Sample period (Time Proportional mode)
Hold Time (Probe Wash modes)
Max Rate (Pulse Proportional, Pulse PID modes)
Minimum Output (Pulse Proportional, Pulse PID modes)
Maximum Output (Pulse Proportional, Pulse PID modes)
Gain (Pulse PID Standard mode)
Integral Time (Pulse PID Standard mode)
Derivative Time (Pulse PID Standard mode)us
Proportional Gain (Pulse PID Parallel mode)
Integral Gain (Pulse PID Parallel mode)
Derivative Gain (Pulse PID Parallel mode)
Input Minimum (Pulse PID modes)
Input Maximum (Pulse PID modes)
Wear Cycle Time (Lag mode)
Delay Time (Lag mode)
Analog (4-20 mA) Output Settings
4 mA Value (Retransmit mode)
20 mA Value (Retransmit mode)
Hand Output
Set Point (Proportional, PID modes)
0 vol. units
0 vol. units
00:10 Minutes
1 Contact
0%
00:00 Minutes
0.001 ml
0%
Low Limit
1 second
1 second
0 seconds
Low end of sensor range
Low end of sensor range
0 seconds
0:00 minutes
0%
0 seconds
0 seconds
Low end of sensor range
0
0
0
0%
0 seconds
0
0
Low end of sensor range
0 seconds
0 seconds
0%
0%
0%
0.001
0.001 seconds
0 seconds
0.001
0.001 /second
0 seconds
Low end of sensor range
Low end of sensor range
10 seconds
0 seconds
Low Limit
Low end of sensor range
Low end of sensor range
0%
Low end of sensor range
7
1,000,000 vol. units
1,000,000,000 vol. units
59:59 Minutes
100,000 Contacts
90%
59:59 Minutes
1,000.000 ml
90%
High Limit
86,400 seconds (0 = unlimited)
86,400 seconds (0 = unlimited)
300 seconds
High end of sensor range
High end of sensor range
23:59:59 HH:MM:SS
59:59 minutes
100%
23:59:59 HH:MM:SS
23:59:59 HH:MM:SS
High end of sensor range
10,000
100
1,000
100%
86,400 seconds
1,000,000
30,000
High end of sensor range
3600 seconds
3600 seconds
100%
100%
100%
1000.000
1000.000 seconds
1000.000 seconds
1000.000
1000.000 /second
1000.000 seconds
High end of sensor range
High end of sensor range
23:59:59 HH:MM:SS
23:59:59 HH:MM:SS
High Limit
High end of sensor range
High end of sensor range
100%
High end of sensor range

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents