Control Panel; Keys - Ricoh PRIPORT JP730 Operating Instructions Manual

Control Panel

Keys

{ { { { Image Density} } } } key
1.
Press to make prints darker or lighter. See
p.20 "Adjusting the Print Image Densi-
ty".
{ { { { Type of Original} } } } key
2.
Press to select Letter or Photo mode. See
p.27 "Selecting Original Type".
{ { { { Clear Modes/Recovery} } } } key
3.
• Clear Modes
Press to clear the previously entered
job settings.
• Recovery
Press to reset the error indicators after
clearing a misfeed. See p.45 "x Clear-
ing Misfeeds".
{ { { { Auto Cycle} } } } key
4.
Press to process the master and make
prints automatically. See p.28 "Auto Cy-
cle—Processing a Master and Making
Prints in One Step".
{ { { { Proof} } } } key
5.
Press to make proof prints.
{ { { { Enlarge/Reduce} } } } key
6.
Press to enlarge or reduce the image. See
p.23 "Preset Reduce/Enlarge—Reducing
and Enlarging Using Preset Ratios".
8
{ { { { Combine} } } } key
7.
Press to combine originals onto one print.
See p.29 "Combine—Combining Two
Originals onto One Print".
{ { { { Image Position} } } } keys
8.
Press to shift the image forwards or back-
wards. See p.18 "Adjusting the Print Im-
age Position".
{ { { { Speed} } } } key
9.
Press to select Fast or Slow for your print-
ing speed. See p.21 "Changing the Print-
ing Speed".
10.
Number keys
Press to enter the desired number of
prints and data for selected modes.
{ { { { q q } } } } key
q q
11.
Press to enter data in selected modes.
{ { { { Clear/Stop} } } } key
12.
Press to cancel a number you have en-
tered or to stop printing.
{ { { { Print Start} } } } key
13.
Press to start printing.
{ { { { Master Making} } } } key
14.
Press to make a master.